Yanmar 4LHA-STE 230 HP Marine Diesel Engine

On sale Yanmar 4LHA-STE, 230 HP Marine Diesel Engine Only US$9.900.00. Bobtail. engine only 4LHA- STE. 230hp Yanmar . Rebuilt injection pump and injectors . Replaced most freshwater hoses and some salt water hoses . New v – belt and valves were adjusted. Comes with brand new riser with gasket and clamp. Also comes with used engine mounts .

Core Engine Specs

• Configuration: In-line, 4-stroke, vertical diesel engine
• Number of Cylinders: 4
• Continuous Output: 169 kW (230 hp) at 3,300 RPM
• Maximum Output (Crankshaft): 177 kW (240 mhp) at 3,300 RPM
• Displacement: 3.455 Liters (211 cubic inches)
• Bore x Stroke: 100 mm x 110 mm (3.94 in x 4.33 in)
• Aspiration: Turbocharged with Intercooler
• Combustion System: Direct Injection
• Rotation Direction: Counter-clockwise (viewed from flywheel / stern) 

• Cooling System: Fresh water cooling via a heat exchanger with a centrifugal fresh water pump
• Lubrication System: Enclosed, forced lubricating system
• Oil Capacity: Approximately 10 liters (varies slightly depending on installation angle)
• Starting System: Electric start, 12 Volt – 2.5 kW
• Alternator Output: 12V – 60A standard (80A optional)
• Control System: Fully mechanical governor and throttle control 

• Dry Weight (Engine Only / Bobtail): 365 kg (805 lbs)
• Dry Weight (With Marine Gearbox): Approx. 386 kg to 409 kg (851 to 901 lbs) depending on the specific transmission unit paired (e.g., ZF or KMH series).
• Dimensions (L x W x H): 1,131 mm x 719 mm x 811 mm